THERMIX TX PRO Perfis separadores térmicos

Thermix TX PRO

Now even better: Thermix® TX.N® plus is becoming Thermix® TX Pro® Thermix® spacers set standards when it comes to insulating effect, quality and functional safety - and have been doing so for decades. Insulating glass and window manufacturers are impressed by them as are architects and planners.

THERMIX TX PRO Perfiles separadores warm edge

There is now an Environmental Product Declaration (EPD) for the insulated glass spacers Thermix TX Pro and Thermix Low Psi. In addition, the EPD for insulbar insulating profiles for thermal separation in windows, doors and façades made from metal has been updated.

Thermix TX Pro will be introduced in Italy oha communication

Thermix TX Pro will be introduced in Italy | glassonweb.com Thermix TX Pro will be introduced in Italy LINKEDIN FACEBOOK Date: 27 July 2017 Source: www.thermix.de Ensinger GmbH Ensinger and CIV System show further improved Thermix spacer for insulating glass units with a warm edge at Vitrum.

THERMIX TX PRO Perfiles separadores warm edge

website maker To be the most complete supplier for the international glass industry, enhancing the range of available products and their performance. These are just some of the Fe

Thermix TX PRO

THERMIX TX PRO is a modern spacer profile made from technopolymer materials and stiffened with two stainless steel wires. A thin stainless steel foil partially covers the profile, allowing for sealant adhesion and acting as a gas barrier.

Thermix TX PRO

THERMIX TX PRO is a modern spacer profile consisting of a particular tecnopolymer stiffened with two highly resistant stainless wires. The bar is partially covered by a very thin stainless steel foil which helps the sealant adhesion and acts as a gas barrier. The spacer bar measures 6.85 millimetres high, 5 or 6 metres long, and wide in a.

THERMIX TX PRO Perfiles separadores warm edge

The Thermix TX Pro, which also has a slightly lower psi value, will gradually replace the previous model, the Thermix TX.N Plus, from the start of 2017. Low Psi. Furthermore, Ensinger is giving visitors to the trade fair a preview of the Thermix Low Psi. As the name suggests, this plastic spacer with barrier film boasts a particularly low psi.

Thermix TX PRO

THERMIX TX PRO is a modern spacer profile consisting of a particular tecnopolymer stiffened with two highly resistant stainless steel wires. The bar is partially covered by a very thin stainless steel foil which helps the sealant adhesion and acts as a gas barrier. The spacer bar measures 6.85 millimetres high, 5 or 6 metres long, and wide in a.

Thermix TX Pro Prodotti Civ System

Ensinger presents two new warm edge spacers, the Thermix TX Pro and the Thermix Low Psi.

Thermix TX Pro Prodotti Civ System

It takes into account standard frames in all sizes with ALU-PRO spacers and uses BF (Bundesverband Flachglas, the Federal Flat Glass Association) and EN ISO 10077-1:2018-01 standards. The method for the arithmetical determination of the Psi values has an accuracy of ± 0.003 W/mK; differences of less than 0.005 W/mK are not significant.

THERMIX TX PRO Perfiles separadores warm edge

Alu Pro: Thermix Tx Pro now fully integrated 08/05/2020 | Print view © Fenzi Group The Thermix IG spacers are now completely integrated into Alu Pro's operations and are produced entirely in Italy. Alu Pro ist part of the Fenzi Group.

Ensinger Civ System Thermix TX Pro jetzt auch in Italien GLASWELT

THERMIX TX PRO Perfis separadores térmicos

Thermix® Warm Edge Loss of heat at the glass edge is drastically reduced, the window edge on the room side remains warmer: The glass has what is called a "warm edge". The risk of condensation and mould formation in those edge area of the window are minimized, preventing a downdraught of cold air. A pleasant, heathy room climate is created.

Il nuovo distanziatore Thermix TX Pro di Ensinger presentato a VITRUM 2017 di Milano

Thanks to the smart combination of highly insulating plastic, reinforcing wires in selected areas and wafer-thin stainless steel, Thermix® TX Pro® spacers have excellent thermal properties. Consequently they enable outstanding Uwvalues while ensuring maximum processing reliability and functional safety.

COVADIS THERMIX® TX PRO®

Thermix® Lasting functional reliability. Lasting UV resistance. Fogging resistance. Gas-tight finish. Tested in accordance with the insulating glass standard EN 1279 parts 2, 3 and 6. CEKAL certified. Ten years warranty. Online. PDF.